How to Connect DStv to Wi-Fi

Did you know that you can connect your DStv to Wi-Fi to access the internet and stream your favourite shows and programmes? You’ll also need to be connected to the internet to record DStv shows if you use a DStv Explora decoder.

If you’re getting to know about this DStv feature now or you know already and you’re searching for ‘how to connect DStv to Wi-Fi,’ this article contains all the information you need about connecting your DStv decoder to Wi-Fi.

In this article, I will show you ‘how to connect DStv to Wi-Fi’. I will cover different methods to connect DStv to Wi-Fi, including using:

• Wi-Fi Connector, 
• WPS,
• Ethernet Cable, and more.

Let’s begin!

How to Connect DStv to Wi-Fi With Wi-Fi Connector

The DStv Wi-Fi Connector is a device that links your DStv Explora to the router in your home. It does so easily and wirelessly. By linking your DStv Explora to the internet, you get access to Connected Services, namely DStv Catch Up Plus Showmax (separate subscription required) and much more. Here are the steps to connect DStv to Wi-Fi with the Wi-Fi Connector:

1. Check that your router is switched on and connected to the internet.
2. Switch your TV on and keep your remote control at hand.
3. Place your Wi-Fi Connecter docking station alongside your Explora (not on top of it).
4. Insert the power cable attached to your Connector’s docking station into any of the USB ports on the back of your Explora.
5. Insert the DStv Wi-Fi Connector into its docking station.
6. The DStv Explora will now automatically search for Wi-Fi networks and display the available options.
7. Press OK on the remote to select your Wi-Fi network, then press OK again to connect the DStv Explora to your Wi-Fi network.
8. If your Wi-Fi network is not found, move the docking station to a position where it is most likely to receive a Wi-Fi signal.

How to Connect DStv to Wi-Fi Without Wi-Fi Connector

If your router does not have a WPS button, or if you are unable to set it up using the automatic setup, you can connect your DStv to Wi-Fi without a Wi-Fi connector. Here are the steps:

1. Press the blue DStv button on your remote.
2. Select Settings.
3. Select User Preferences.
4. Select Connected Services.
5. Choose which services you want on and which you want off.
6. Select your Wi-Fi network from the list.
7. Enter your password and select ‘OK.’
8. Wait for your DStv to connect to your Wi-Fi network

How to Connect DStv to Wi-Fi With Wps

If your router has a WPS button, you can connect your DStv to Wi-Fi with WPS. Follow the steps below:

1. Press the WPS button on your router.
2. Press the WPS button on the DStv Wi-Fi Connector.
3. Your DStv will automatically search for and connect to the Wi-Fi network it finds.
4. Enter the Wi-Fi password when prompted.
5. If there’s an error, check the indicator light. If it’s amber, then there is an issue with the password or network. Check the password again and try to reconnect

How to Connect DStv to WiFi Using Ethernet Cable

If your DStv Explora is in the same room where you have your house’s router, you can connect the two directly using an Ethernet cable. Follow these steps:

1. Make sure that your router is switched on and connected to the internet.
2. Switch your TV on.
3. Plug one end of the Ethernet cable into the clearly marked Ethernet port (the green one) at the back of your Explora.
4. Plug the other end of the Ethernet cable into any of the Ethernet ports at the back of your router.
5. That’s all, you’ve successfully connected your decoder to the internet.

How to Connect DStv Explora Ultra to WiFi

The DStv Explore Ultra is a new decoder that comes with built-in WiFi. Here are the steps to connect DStv Explora Ultra to WiFi:

1. Turn on your TV and the DStv Explore Ultra decoder.
2. Press the Home button on your remote control.
3. Select Settings.
4. Select Network.
5. Select Wireless.
6. Select your WiFi network.
7. Enter your WiFi password.
8. Press Connect.

How to Connect DStv Explora and WiFi Connector to the Internet

Follow these steps to connect DStv Explora and WiFi Connector to the Internet:

1. Check that your router is switched on and connected to the internet.
2. Switch your TV on and keep your remote control at hand.
3. Place your Wi-Fi Connecter docking station alongside your Explora (not on top of it).
4. Insert the power cable attached to your Connector’s docking station into any of the USB ports on the back of your Explora.
5. Insert the DStv Wi-Fi Connector into its docking station.
6. The DStv Explora will now automatically search for Wi-Fi networks and display the available options.
7. Press OK on the remote to select your Wi-Fi network, then press OK again to connect the DStv Explora to your Wi-Fi network.
8. If your Wi-Fi network is not found, move the docking station to a position where it is most likely to receive a Wi-Fi signal.

How to connect DStv internet router to phone

To connect your DStv internet router to your phone, follow these steps:

1. Turn on your phone’s WiFi.
2. Select your DStv internet router from the list of available networks.
3. Enter the password for your DStv internet router.
4. Select Connect.

Conclusion

To connect your DStv to Wi-Fi you can use the WiFi Connector, Wps, Ethernet Cable, or DStv Explore Ultra to connect your DStv to WiFi. By following the steps outlined in this article, you can enjoy connected services on your decoder, such as DStv Catch Up Plus and Showmax (separate subscription required) and stream or record your favourite shows on DStv.

Stay Connected with DStv.

Frequently Asked Questions

Why Is My DStv Wi-Fi Connector Not Working?

If your DStv Wi-Fi Connector is not working, try moving it to a position where it is most likely to receive a Wi-Fi signal. If that doesn’t work, power cycle the connector by unplugging it and waiting for 60 seconds before trying again. If that doesn’t work, contact the multichoice customer support for assistance.

Why Is My Wi-Fi Showing No Internet?

If your Wi-Fi is showing no internet, try resetting your router. If that doesn’t work, check and ensure that you’ve not run out of your data bundle or the data plan has expired. Kindly buy another data plan if your current bundle has expired. If everything looks good, contact your internet service provider for help.

How do I reset my DStv Wi-Fi Connector?

Unplug the cable from the back of the decoder, then unplug the connector from the Wi-Fi docking station and wait for about 60 seconds or more before reconnecting them.

Can I Connect My DStv to a Public Wi-Fi Network?

Yes, you can connect your DStv to a public Wi-Fi network. To connect your DStv to a public Wi-Fi network, follow these steps:

1. Turn on your TV and DStv decoder.
2. Press the blue DStv button on your remote.
3. Select Settings.
4. Select User Preferences.
5. Select Connected Services.
6. Choose which services you want on and which you want off.
7. Select the Wi-Fi network you want to connect to.
8. Enter the password for the Wi-Fi network.
9. Select Connect.

Can I Use a VPN to Connect My DStv to a Public Wi-Fi Network?

Yes, you can use a VPN to connect your DStv to a public Wi-Fi network – A VPN can help protect your internet traffic on public Wi-Fi. To connect your DStv to a public Wi-Fi network using a VPN, do the following steps:

1. Download and install a VPN on your device.
2. Connect to a VPN server.
3. Connect your DStv to the public Wi-Fi network.
4. Enjoy your DStv!

Note: Some public Wi-Fi networks may block VPN connections. If you are having trouble connecting your DStv to a public Wi-Fi network using a VPN, turn off the VPN and try reconnecting.