How to Fix GOtv No Signal 

Are you experiencing a “No Signal” error from your GOtv decoder? This can be frustrating, especially when trying to watch your favorite shows. This error can be caused by several factors, which include poor signal strength caused by bad weather conditions, faulty cables, and incorrect settings.

In this article, I’ll show you how to fix GOtv No Signal error on your GOtv decoder and get it back up and running again to enjoy your favorite shows and channels on GOtv. Continue reading to learn more!

Check This Out!
👉🏽 Mafia Offers: How To Make People Beg to Buy Whatever You Have For Sale
👉🏽 How to Make 300K – 500K Every Month Through E-commerce
👉🏽 Facebook & Instagram Ads Sales Generation Blueprint

How to Check GOtv Decoder Signal Strength

Before we dive into how to fix GOtv no signal error, it’s important to check your GOtv decoder’s signal strength. Here’s how to do it:

1. Press the “Menu” button on your remote control.
2. Select “Advanced Options” and press “OK.”
3. Select “Signal Information” and press “OK.”
4. Your signal strength will be displayed on the screen.

If your signal strength is below 70%, you may experience the “No Signal” error. In this case, you’ll need to boost your signal strength by adjusting your GOtv Antenna.

How to Fix GOtv No Signal Error

Here are some steps you can take to fix the “No Signal” error on your GOtv decoder:

1. Make sure all cables are properly connected to your decoder and TV. If any of the cables are loose, tighten them. Check the Cable coming from the Antenna to your decoder and make sure there is no physical damage on the Cable. Try another cable to rule out issues with the Cable, or you can try the Cable on another decoder.
2. Ensure that your Antenna is aligned correctly and pointing in the right direction. If your Antenna is damaged, replace it. Ensure the Antenna faces the sky and is not blocked by walls; the higher it is, the better.
3. Check your signal strength: As mentioned earlier, if your signal strength is below 70%, you may experience the “No Signal” error. In this case, you’ll need to boost your signal strength by positioning the Antenna well. You can turn it around or take the Antenna higher to improve the signal quality.
4. Check your decoder settings: Make sure your decoder settings are correct. Go to “Menu,” select “Advanced Options,” and then select “Installation.” From there, you can check your decoder settings and make the necessary changes.
5. If there’s a sudden change in weather and it’s cloudy outside, you may have to wait till the weather clears up, and most likely, the ‘No signal’ issue will be resolved automatically.

How to Boost GOtv Decoder Signal

If your signal strength is below 70%, you’ll need to boost your signal strength. Here are some ways to do it:

1. Make sure your antenna is aligned correctly and pointing in the right direction. You can also move your antenna to a higher location.
2. Use a signal booster: A signal booster can help amplify your signal strength. You can purchase a signal booster from any electronics store.
3. Faulty cables can also affect your signal strength.
4. Reset your Decoder: If all else fails, you can reset your Decoder to its default settings. Follow these tips to do so:
   1. Press the “Menu” button on your remote control.
   2. Select “Advanced Options” and press “OK.”
   3. Select “Reset to Factory Defaults” and press “OK.”
   4. Your Decoder will reset to its default settings.

How to Connect My GOtv Antenna to My Decoder

Connecting your GOtv antenna to your Decoder is a simple process. Here’s how to do it:

1. Connect your Decoder to your TV using the AV cables present. Make sure you match the colours: yellow to yellow, red to red, and white to white.
2. Follow the instructions in the packaging to arrange the GOTenna properly and mount it in a secure location or at the top of your building. Make sure it’s facing the available transmission tower.
3. Connect the cable to the space provided on the GOtv Antenna.
4. Locate the RF IN port on your Decoder, then connect the RF cable from your antenna to the RF IN port on your Decoder.
5. Insert the power cable into the Decoder and turn on your Decoder and TV.
6. Press the “Menu” button on your remote control.
7. Select “Advanced Options” and press “OK.”
8. Select “Installation” and press “OK.”
9. Select “Auto Scan” and press “OK.”
10. Your Decoder will scan for available channels.

How to Check if an LNB Is Working

If you suspect that your LNB is not working, you can check it using a satellite signal meter. Here’s how to do it:

1. Connect the satellite signal meter to your LNB.
2. Turn on your decoder and TV.
3. Press the “Menu” button on your remote control.
4. Select “Advanced Options” and press “OK.”
5. Select “Installation” and press “OK.”
6. Select “Manual Scan” and press “OK.”
7. Your decoder will display a signal strength meter.
8. If the signal strength meter shows a signal, your LNB is working. If not, your LNB may be faulty.

How to Fix E48-32 Searching for Signal on GOtv

To fix “E48-32 Searching for Signal try the following troubleshooting tipst:

1. Make sure all cables are properly connected to your decoder and TV. If any of the cables are loose, tighten them.
2. Ensure that your antenna is properly aligned and pointing in the right direction. If your antenna is damaged, replace it.
3. Switch off the decoder power at the wall plug and wait at least 10 seconds before switching it on again. You can also reset the Decoder to factory default settings as a last resort.

How to Unlock GOtv Signal Quality

To improve the signal quality of your GOtv decoder, check all the cables and ensure they are correctly connected to your decoder and TV. Tighten any loose cables for a stronger connection. Also, check your antenna and ensure it’s correctly aligned and pointing in the right direction. If your antenna is damaged, replace it. Check your signal strength; if it’s below 70%, boost it. Finally, review your decoder settings, make necessary changes, and ensure that everything is working well.

How to Reset GOtv Decoder

If you’re still experiencing issues with your GOtv decoder, you can reset it to its default settings. Follow these steps:

1. Press the “Menu” button on your remote control.
2. Select “Advanced Options” and press “OK.”
3. Select “Reset to Factory Defaults” and press “OK.”
4. Your decoder will reset to its default settings.

You can reset a GOtv decoder by texting “Reset” and your IUC number to 288. For example, “Reset 2068824563124” to 288. Ensure you keep your decoder switched ON when sending the text message.

Conclusion

That’s it! How to fix GOtv No Signal error on your GOtv decoder. I have provided several steps to troubleshoot and fix the issue, including checking your cables, Antenna, and signal strength, resetting your decoder, and boosting your signal strength.

Remember to always check your decoder’s signal strength before attempting to fix any issues. If you still need help with your GOtv decoder, contact GOtv customer care for further assistance.

Frequently Asked Questions

Why Is My GOtv Decoder Not Coming On?

If your GOtv decoder is not coming on, it could be due to several reasons. Here are some things you can do to troubleshoot the issue:

1. Make sure your decoder is correctly plugged into a power source. If your power source is faulty, try plugging your decoder into a different power source.
2. Make sure all cables are properly connected to your decoder and TV. If any of the cables are loose, tighten them.
3. Ensure that your remote control is working properly. If your remote control is faulty, replace the batteries or purchase a new remote control.

What Is the Meaning of E48 32 on GOtv?

The “E48-32 Searching for Signal” error is a common error that occurs when your decoder cannot receive a signal. Several factors, including poor signal strength, faulty cables, and incorrect settings, can cause it. To fix this issue, you can try the steps outlined in the “How to Fix E48-32 Searching for Signal on Gotv” section of this article. You can also fix errors on the GOtv Selfcare page here. 

Why Is Channels TV Not Showing on GOtv?

If Channels TV is not showing on your GOtv decoder, it could be due to several reasons, such as low signal strength, expired subscription, and more. Read more about how to fix GOtv Missing channels here.

What Is the Code to Clear Error in GOtv?

To clear an error on your GOtv decoder, dial *288# and continue the instructions below:

1. Select ‘Fix Errors”
2. Enter your ‘IUC number’ and press “OK.”
3. Continue the prompts to select the error code and clear it.

What Is the LNB Cable?

The LNB (Low Noise Block) cable is a cable that connects your dish or Antenna to your decoder. It is responsible for receiving the signal from the satellite and transmitting it to your decoder. If your LNB cable is faulty, you may experience issues with signal strength.